1.8"
-
Apacer SSD AS2280P4 Series – 256GB AP256GAS2280P4-1 (M.2 PCI-E, Olvasás: 1800 MB/s, Írás: 1100 MB/s)
10 870 FtCapacity NAND Flash Interface Sustained Read Performance Sustained Write Performance IOPs (4K Random Write) ECC Support Shock Vibration Low Power Consumption (Active/Idle) MTBF Humidity Standard Operating Temperature Storage Temperature Dimensions Certificate Warranty AS2280P4 M.2 PCIe Gen 3 x4 SSD 240GB / 256GB / 480GB / 512GB / 1TB 3D TLC PCIe Gen3 x4 240GB:Up to 1,800MB/s
256GB:Up to 1,800MB/s
480GB:Up to 2,100MB/s
512GB:Up to 2,100MB/s
1TB:Up to 3,000MB/s
240GB:Up to 1,100MB/s
256GB:Up to 1,100MB/s
480GB:Up to 1,500MB/s
512GB:Up to 1,500MB/s
1TB:Up to 2,000MB/s
*The performance may vary due to host hardware, software , usage and storage capacity.Up to 360,000 IOPS Up to 72bit/1KB 1500G/0.5msec 7~800Hz, 3.08Grms 275/80mA 1,500,000 hours 5%~95% 0°C ~ +70°C -40 ~ +85°C (L)80 x (W)22 x (H)2.25mm KCC, CE, FCC, VCCI, RCM, BSMI 3 Years -
Silicon Power SSD – 250GB UD85 (r:3300MB/s, w:1300 MB/s, NVMe 1.4 támogatás, M.2 PCIe Gen 4×4)
14 370 Ft- PCIe Gen 4×4 interface with read speeds up to 3,600MB/s and write speeds up to 2,800MB/s
- Supports NVMe 1.4 and Host Memory Buffer (HMB) for higher performance and lower latency
- 3D NAND technology allows for dense storage in a compact design
- Available in a range of large storage capacity options: 250GB, 500GB, 1TB and 2TB
- Supports low density parity check (LDPC) coding to ensure accuracy of data transmission and reliability of data access
- Supports SLC Caching to improve sequential read/write and random read/write performance
- Supports RAID to protect data in the case of a drive failure
- Built-in E2E data protection for enhanced data transfer integrity
- Small form factor M.2 2280 (80mm) allows for easy installation in laptops, small form factor PC systems, and some ultrabooks
-
Silicon Power SSD – 500GB UD85 (r:3600MB/s, w:2400 MB/s, NVMe 1.4 támogatás, M.2 PCIe Gen 4×4)
20 400 Ft- PCIe Gen 4×4 interface with read speeds up to 3,600MB/s and write speeds up to 2,800MB/s
- Supports NVMe 1.4 and Host Memory Buffer (HMB) for higher performance and lower latency
- 3D NAND technology allows for dense storage in a compact design
- Available in a range of large storage capacity options: 250GB, 500GB, 1TB and 2TB
- Supports low density parity check (LDPC) coding to ensure accuracy of data transmission and reliability of data access
- Supports SLC Caching to improve sequential read/write and random read/write performance
- Supports RAID to protect data in the case of a drive failure
- Built-in E2E data protection for enhanced data transfer integrity
- Small form factor M.2 2280 (80mm) allows for easy installation in laptops, small form factor PC systems, and some ultrabooks
-
Apacer SSD AS2280P4 Series – 1TB AP1TBAS2280P4-1 (M.2 PCI-E, Olvasás: 3000 MB/s, Írás: 2000 MB/s)
29 750 FtCapacity NAND Flash Interface Sustained Read Performance Sustained Write Performance IOPs (4K Random Write) ECC Support Shock Vibration Low Power Consumption (Active/Idle) MTBF Humidity Standard Operating Temperature Storage Temperature Dimensions Certificate Warranty AS2280P4 M.2 PCIe Gen 3 x4 SSD 240GB / 256GB / 480GB / 512GB / 1TB 3D TLC PCIe Gen3 x4 240GB:Up to 1,800MB/s
256GB:Up to 1,800MB/s
480GB:Up to 2,100MB/s
512GB:Up to 2,100MB/s
1TB:Up to 3,000MB/s
240GB:Up to 1,100MB/s
256GB:Up to 1,100MB/s
480GB:Up to 1,500MB/s
512GB:Up to 1,500MB/s
1TB:Up to 2,000MB/s
*The performance may vary due to host hardware, software , usage and storage capacity.Up to 360,000 IOPS Up to 72bit/1KB 1500G/0.5msec 7~800Hz, 3.08Grms 275/80mA 1,500,000 hours 5%~95% 0°C ~ +70°C -40 ~ +85°C (L)80 x (W)22 x (H)2.25mm KCC, CE, FCC, VCCI, RCM, BSMI 3 Years -
ADATA SSD 1TB – XPG SX8200 Pro (3D TLC, M.2 PCIe Gen 3×4, r:3500 MB/s, w:3000 MB/s)
34 100 FtXPG SX8200 Pro PCIe Gen3x4 M.2 2280 SSD
Az SX8200 Pro M.2 2280 SSD az XPG eddigi leggyorsabb SSD-je, és lelkes PC-rajongók, játékosok és túlhúzók számára készült. Rendelkezik egy ultragyors PCIe Gen3x4 interfésszel, amely 3500/3000 MB/s olvasási/írási csúcssebességet kínál, ami jóval megelőzi a SATA 6 Gb/s sebességét. Az NVMe 1.3 támogatásával az SX8200 Pro kiváló véletlenszerű olvasási/írási teljesítményt és több feladatos munkavégzést biztosít. Az SLC-gyorsítótárral, a DRAM-gyorsítótár pufferrel, az E2E adatvédelemmel és az LDPC ECC-vel megőrzi a nagy sebességet és az adatok sértetlenségét, még olyan intenzív alkalmazások során is, mint a játékok renderelése és a túlhajtása.
Jellemzők:
- Ultragyors PCIe Gen3x4 interfész: R/W sebesség akár 3500/3000 MB/s
- NVMe 1.3 támogatás
- 3D NAND Flash a nagyobb kapacitás és tartósság érdekében
- Fejlett LDPC ECC technológia
- SLC gyorsítótár és DRAM gyorsítótár puffer
- E2E adatvédelem és RAID Engine
- Kompakt M.2 2280 méret – ideális játékhoz és csúcskategóriás asztali számítógépekhez
-
Silicon Power SSD – 1TB UD85 (r:3600MB/s, w:2800 MB/s, NVMe 1.4 támogatás, M.2 PCIe Gen 4×4)
35 200 Ft- PCIe Gen 4×4 interface with read speeds up to 3,600MB/s and write speeds up to 2,800MB/s
- Supports NVMe 1.4 and Host Memory Buffer (HMB) for higher performance and lower latency
- 3D NAND technology allows for dense storage in a compact design
- Available in a range of large storage capacity options: 250GB, 500GB, 1TB and 2TB
- Supports low density parity check (LDPC) coding to ensure accuracy of data transmission and reliability of data access
- Supports SLC Caching to improve sequential read/write and random read/write performance
- Supports RAID to protect data in the case of a drive failure
- Built-in E2E data protection for enhanced data transfer integrity
- Small form factor M.2 2280 (80mm) allows for easy installation in laptops, small form factor PC systems, and some ultrabooks
-
ADATA SSD 1TB – XPG GAMMIX S70 BLADE (3D, M.2 PCIe Gen 4×4, r:7400 MB/s, w:5500 MB/s, PS5 Ready)
41 400 FtXPG GAMMIX S70 BLADE PCIe Gen4x4 M.2 2280 SSD
Élvezze a következő generációs teljesítményt az XPG GAMMIX S70 BLADE PCIe Gen4x4 M.2 2280 (SSD). A legújabb PCIe Gen4x4 interfésszel és számos egyéb képességgel rendelkező meghajtó akár 7400/6800 MB/s olvasási/írási sebességet is elérhet. Hűtőbordájának köszönhetően akár tökéletes PS5 tárhely bővíthetőség.Jellemzők:
- R/W sebesség akár 7400/6800 MB/s PC-nél/laptopnál
- PS5 kompatibilis (Olvasási sebesség akár 6300 MB/s)
- Ultragyors PCIe Gen4 x4 interfész
- NVMe 1.4 támogatás
- Magas hőmérséklethez ellenálló alumínium hűtőborda,
amely akár 20%-kal is képes csökkenteni a hőmérsékletet - Akár 4 TB kapacitás
- SLC gyorsítótár és DRAM gyorsítótár puffer
- Fejlett LDPC ECC technológia
- E2E adatvédelem és RAID Engine
- AES 256 bites titkosítás támogatása
- Kompakt M.2 2280 forma – ideális játékhoz és csúcskategóriás asztali számítógépek
-
Apacer SSD 1TB – AS2280Q4U Series (3D, M.2 PCI-E Gen 4×4, Olvasás: 7300 MB/s, Írás: 6000 MB/s, PS5 Ready)
42 500 FtAPACER AS2280Q4U SSD
Az AS2280Q4U villámgyors PCIe Gen4x4 interfésze teljes mértékben megfelel az NVMe 1.4 szabványnak. Akár 7400/7000 MB/s-os szekvenciális olvasási/írási teljesítményével kétszer olyan gyors, mint a Gen3 SSD, és 15-ször gyorsabb, mint a SATA SSD, így páratlan teljesítményt nyújt a játékosok és videókészítők számára.
Az akár 7400/7000 MB/s szekvenciális olvasási/írási teljesítménnyel az AS2280Q4U a játék élén tart. Minden tekintetben megfelel a PS5 M.2 SSD-követelményeinek, az AS2280Q4U egy egyszerű megoldás, amellyel extra tárhelyet lehet szerezni PS5-ön.
Termékjellemzők:
- PCIe Gen4x4 interfész
- Rendkívül gyors olvasási/írási sebesség: akár 7400 / 7000 MB/s
- Megfelel a PS5 játékkonzolok kapacitásbővítési igényeinek
- Dedikált hűtőborda a jobb hűtés érdekében
- Rendkívül nagy, akár 2 TB tárhely
Műszaki adatok
- Forma tényező: M.2 2280
- Interfész: PCIe Gen4x4
- Kapacitás: 512GB/1TB/2TB
- NAND Flash: 3D NAND
- MTBF: 1 600 000 óra
- Hőmérséklet-tartomány
– Normál működés: 0°C ~ +70°C
– Tárolás: -40 ~ +85°C - Lökés: 1500 G/0,5 ms
- Méretek (H x Sz x Ma)
– Egyoldalas: 80,00 x 22,00 x 2,25 mm
– Kétoldalas: 80,00 x 22,00 x 3,50 mm
– Hűtőbordával: 80,00 x 22,9 x 10,80 mm - Súly
– Egyoldalas: 7,6 g
– Kétoldalas: 9,7g - Garancia: 5 év korlátozott
-
ADATA SSD 2TB – XPG GAMMIX S70 BLADE (3D, M.2 PCIe Gen 4×4, r:7400 MB/s, w:6800 MB/s, PS5 Ready)
66 000 FtXPG GAMMIX S70 BLADE PCIe Gen4x4 M.2 2280 SSD
Élvezze a következő generációs teljesítményt az XPG GAMMIX S70 BLADE PCIe Gen4x4 M.2 2280 (SSD). A legújabb PCIe Gen4x4 interfésszel és számos egyéb képességgel rendelkező meghajtó akár 7400/6800 MB/s olvasási/írási sebességet is elérhet. Hűtőbordájának köszönhetően akár tökéletes PS5 tárhely bővíthetőség.Jellemzők:
- R/W sebesség akár 7400/6800 MB/s PC-nél/laptopnál
- PS5 kompatibilis (Olvasási sebesség akár 6300 MB/s)
- Ultragyors PCIe Gen4 x4 interfész
- NVMe 1.4 támogatás
- Magas hőmérséklethez ellenálló alumínium hűtőborda,
amely akár 20%-kal is képes csökkenteni a hőmérsékletet - Akár 4 TB kapacitás
- SLC gyorsítótár és DRAM gyorsítótár puffer
- Fejlett LDPC ECC technológia
- E2E adatvédelem és RAID Engine
- AES 256 bites titkosítás támogatása
- Kompakt M.2 2280 forma – ideális játékhoz és csúcskategóriás asztali számítógépek
-
Apacer SSD 2TB – AS2280Q4U Series (3D, M.2 PCI-E Gen 4×4, Olvasás: 7400 MB/s, Írás: 7000 MB/s, PS5 Ready)
66 000 FtAPACER AS2280Q4U SSD
Az AS2280Q4U villámgyors PCIe Gen4x4 interfésze teljes mértékben megfelel az NVMe 1.4 szabványnak. Akár 7400/7000 MB/s-os szekvenciális olvasási/írási teljesítményével kétszer olyan gyors, mint a Gen3 SSD, és 15-ször gyorsabb, mint a SATA SSD, így páratlan teljesítményt nyújt a játékosok és videókészítők számára.
Az akár 7400/7000 MB/s szekvenciális olvasási/írási teljesítménnyel az AS2280Q4U a játék élén tart. Minden tekintetben megfelel a PS5 M.2 SSD-követelményeinek, az AS2280Q4U egy egyszerű megoldás, amellyel extra tárhelyet lehet szerezni PS5-ön.
Termékjellemzők:
- PCIe Gen4x4 interfész
- Rendkívül gyors olvasási/írási sebesség: akár 7400 / 7000 MB/s
- Megfelel a PS5 játékkonzolok kapacitásbővítési igényeinek
- Dedikált hűtőborda a jobb hűtés érdekében
- Rendkívül nagy, akár 2 TB tárhely
Műszaki adatok
- Forma tényező: M.2 2280
- Interfész: PCIe Gen4x4
- Kapacitás: 512GB/1TB/2TB
- NAND Flash: 3D NAND
- MTBF: 1 600 000 óra
- Hőmérséklet-tartomány
– Normál működés: 0°C ~ +70°C
– Tárolás: -40 ~ +85°C - Lökés: 1500 G/0,5 ms
- Méretek (H x Sz x Ma)
– Egyoldalas: 80,00 x 22,00 x 2,25 mm
– Kétoldalas: 80,00 x 22,00 x 3,50 mm
– Hűtőbordával: 80,00 x 22,9 x 10,80 mm - Súly
– Egyoldalas: 7,6 g
– Kétoldalas: 9,7g - Garancia: 5 év korlátozott